|
print technical specifications
Thermocarbon-Manufactured High Quality Dicing Blade Flanges
Now Viewing Flange Type:
4.3" to 4.6" Series “BA” Type Flanges
Superior three piece design, delivers high accuracy and precision, for mounting 4.3" O.D. to 4.6" O.D. Series Dicing Blades
Thermocarbon-manufactured high-quality dicing blade flanges for use on dicing saws equipped with spindles having 1.250" arbor diameter for mounting.
back to all flanges |
|
 |
Technical Specifications:
 |
1Blade Exposure
(inches) (mils) |
| .010 |
10 |
| .015 |
15 |
| .020 |
20 |
| .025 |
25 |
| .030 |
30 |
| .040 |
40 |
| .050 |
50 |
| .060 |
60 |
| .070 |
70 |
| .080 |
80 |
| .090 |
90 |
| .100 |
100 |
| .125 |
125 |
| .150 |
150 |
| .175 |
175 |
| .200 |
200 |
| .250 |
250 |
| .300 |
300 |
| .350 |
350 |
| .400 |
400 |
| .450 |
450 |
| .500 |
500 |
| .550 |
550 | | |
 |
| Diamond Blade Size |
Flange
Part Number
Prefix |
| 4.300" O.D. x 3.000" I.D. |
4.3BA |
| 4.500" O.D. x 2.750" I.D. |
4.5BA |
| 4.600" O.D. x 3.500" I.D. |
4.6BA |
| 4.600" O.D. x 3.497" I.D. |
4.6HBA | |
| Material |
Flange
Part Number
Suffix |
| 303 SS/Black Anodized Aluminum |
S |
| Titanium/Black Anodized Aluminum |
T | | |
Recommended Torque: 30 in. lbs
1 Intermediate exposure sizes are available in .005" increments as well as extended hub design for blades thicker than .020".
See blade exposure guidelines under the 1986 Technical Article Diamond Blade System and Substrate Interaction Considerations
Chart below indicates maximum exposure for each flange series:
Flange
Part Number
Prefix |
Maximum
Blade
Exposure |
| 4.3BA |
500 |
| 4.5BA |
550 |
| 4.6BA |
400 |
| 4.6HBA |
400 | |
|
|
